15% Graphite Filled PTFE Rod
Buy quality 15% Graphite Filled PTFE Rod from us, we can make over 3000 kgs PTFE rod one day
Content
What is 15% Graphite Filled PTFE Rod?
15% graphite filled PTFE rod is made of 15% graphite with 85% PTFE. It is a compound with excellent thermal- and electrical conductivity. Used For antistatic linings and bearings. It has an excellent combination of properties Typical of the PTFE fluoropolymer resins.Product Properties:
15% graphite filled PTFE rod has improved thermal dimensional stability, good chemical stability, improved deformation under load, good thermal conductivity, improved compression strength, improved surface hardness, low friction behaviour, limited wear rate, exceptional temperature resistance and Improved sliding propertiesService Temperature:
15% graphite filled PTFE rod offers excellent resistance to continuous service temperatures – working conditions from -200° C up to 250°C.Typical application
In mechanical field 15% graphite filled PTFE rod is used for pumps, mixers, compressors, wear bands, in appliances, in automotive lip seals, slides and solenoid valves and where electrical insulation is not required.Properties
|
Properties |
Test Methods |
Typical Value |
Test Unit |
| Density |
ASTM D792 |
2.1 |
g/cm3 |
| Hardness shore D | ASTM D2240 | 62 |
Sh.D |
|
Tensile strength |
ASTM D638 |
17 | Mpa |
| Elongation at break 23°C |
ASTM D638 |
175 |
% |
| Coefficient of dynamic friction | ASTM D1894 | 0.15 |
- |
| Water Absorption (Max.) | ASTM D570 | 0 | % |
| Working temperature | - | -200 to 260 | °C |
Related Category
Fiberglass Filled PTFE
Bronze-filled PTFE
Polyimide Filled PTFE
Carbon Filled PTFE
Ekonol Filled PTFE
PEEK Filled PTFE
Graphite Filled PTFE
MoS2 Moly Filled PTFE
Related Products